Description
Got Bus Bars?
Installing the Vue 3 home energy monitor 200A current sensors around a bus bar is difficult to impossible and dangerous. Many North American homes have combo panels with the meter on one side and breakers on the other. These panels send the current from the meter side to the mains via bus bars. We have a solution!
Flexible Current Sensors replace the 200A main sensors that ship with Vues.They employ a bendable Rogowski coil with a 1.4” (36mm) opening that can fit around most bus bars or into tight spaces where a standard current sensors clamp cannot fit.
Flexible Sensors are designed for split phase 120/240V North American Homes or 240V single phase power and meant for use with only with the Gen 3 Emporia Vue. Emporia highly recommends that flexible sensor installation be performed by a licensed electrician or other qualified professional.
Requires installation of an included alternative power supply for the flexible sensors.
- Replaces traditional CT clamps with a current sensing Rogowski cable
- Can be used to measure current around busbars in some electrical panels where main cables are not accessible
- Accurate energy monitoring
- Plugs into ports 1, 2, or 3 of your Gen 3 Emporia Vue
- Maximum Current: 200A
- Integrator input voltage: 12V DC
- Power supply output voltage: 12V DC, regulated
- Power supply input voltage: 100-240V AC
200A flexible sensor dimensions:
- Coil window diameter: 55mm
- Coil cable diameter: 7mm
- Cable Length: 1M
Power supply dimensions:
- 39.5mm x 91mm x 28.5mm